Friday, September 12, 2008
prototype part 2
having some trouble with the wiring in part 2 (photometric) of the prototype assignment. any ideas what we're doing wrong? it doesn't seem right that we're putting 2 wires into one of the breadboard holes, but that's what we've got from the diagrams. part 1 worked.
# posted by Michael Walch : 7:01 PM
Comments:
<< Home
two of our wires share one port hole (your red and white), so i think that's ok. the only thing that looks different is the green wire that enters near the black transistor. both ends of our wire enter along the first row (nearest the black ports), so you might try moving that end of the wire over one hole.
(hopefully that works!)
lld
(hopefully that works!)
lld
thanks. we noticed the wire mistake and corrected it, still with no success. we also tried again from the beginning, including re-creating the codes. maybe the photoresistor does not work?
if you'd like to try, there are other photoresisters in the box at my desk. you could try one of our capacitors too..
Post a Comment
<< Home
